AUSMILL is a product brand of the AUSTAR Group, which specializes in particle size control, including hammer mills, cone mills and centrifugal sieving mills. The products are designed, developed and manufactured by AUSTAR independently, and are widely used in the fields of pharmaceutical, food and fine chemicals etc.
HMA series hammer mills can crush all kinds of crystalline and fibrous materials of strong toughness. A star-type valve is installed at the inlet of the hammer mill, which can control the feed speed and avoid producing dust effectively. Screen size of different specifications (0.2 ~10mm) fully meets the requirements of crushing particle size, and can be customized according to the actual situation of clients.
By adopting the design of front door, the device is convenient for disassembly, installation, cleaning, replacement of the sharpening rotor; the cavity cooling device ensures the minimum temperature rise of the material during the crushing process, and the temperature detecting and control devices are installed in the rotating shaft and the crushing cavity to monitor the operating conditions in real time.
One side of the rotor is a hammer, and the other side is a knife, the different materials can be crushed by the both sides; the hard and crystalline materials are crushed by the hammer side, and the fibrous materials are crushed by the knife side.
CIP/SIP can be realized.
CMA series cone mill can crush various materials, especially for the viscous material.
The crushing rotor has two forms: beveled structure and rounded structure, which meet the crushing requirements for dry materials and wet materials. The crushing blade rotor is provided with stirring teeth to prevent materials from accumulating and bridging during the crushing process.
It can be equipped with a screen of 0.5~10mm aperture to meet the requirements of different particle sizes, and can also be customized according to the products requirements.
The control system monitors and displays the key parameters such as the rotating speed of the crushing blade rotor and the temperature of the crushing cavity in real time, and it realizes the monitoring of the operating conditions in crushing process.
The connection of materials inlet and outlet are convenient, the equipment has a good sealing performance, and CIP/SIP can be realized.
The centrifugal sieving mill is suitable for a variety of materials, especially for crushing viscous materials, and its sieving effect is remarkable. SCMA series centrifugal sieving mill has compact structure, large capacity, and is operated easily.
The SCMA series centrifugal sieving mill has a small temperature rise during the crushing process and has a good protective effect on heat sensitive materials.
The high-speed rotating screen cuts and breaks the materials, and the qualified materials pass through the screen under the action of centrifugal force, which prevents blocking effectively.
The fixed crushing blade can crush the unqualified material agglomerates attached to the screen and make them pass through the screen smoothly, realizing the control of the crushed particle size effectively.
Easy to disassemble and clean, CIP/SIP can be realized.